BEblog

 Yield matters! I was visiting a customer and was being shown the warm room where they had mobile racks holding large jars filled with product.  They told me that if the room temp wasn’t kept the right temperature they wouldn’t yield the optimal volume of product.  Each jar could be worth $1,000,000 of product.

The problem was that the mobile racks kept breaking the Air Temperature Sensor when the carts were moved into & out of the room.  We took a look and designed an Air Temperature Sensor that would hold up to the abuse and give an accurate reading.   I guess you could say it was worth a million bucks.

Durability was certainly important to this customer.  What characteristic is critical to your process?  Comment here and share your perspective. 

Thanks.

Jim Burns

Hey,  check out our listing in Pharmaceutical Online. .Click here then page down or click on Burns in the listing index under Measuring Devices.Custom PRT designs to support the advancement of health and Bio research, to keep the Burns Engineers healthy so we can continue to provide valuable instruments  in support of the important work of the Life Sciences Industry.It’s just the kind of stuff that gets us excited.  What excites you about the Life Sciences? Add a comment and let us know what you think..  Or email one of our Temperature Measurement Experts at info@burnsengineering.com.

The Engineering team at Burns has for many years enjoyed the air temperature measurement challenges in clean rooms, HVAC, storage areas, transportation, compressor rooms, production areas, environmental chambers, critical office areas….. 

 .

.

.

.

In some instances it’s all about durability and accuracy. 

.

.

. 

. 

In other cases the challenge is measuring the temperature of the  AIR and not the WALL or some other influence within the wall.

.

Burns brings to these applications;  a myriad of design styles and adaptations, the wisdom that can be found in the series of technical papers on PRT Sources of Error and a passion for creative problem solving.

Share with us your Air temperature measurement challenge and we’ll get the team engaged in making you a hero!  Call us at 952-935-4400, email us at info@burnsengineering.com or comment here on the BEblog.

We are ready to discover, design and create something to insure your success.  That’s just the stuff we like to do….

 Chuck

NCSLI in Florida was the place to be in early August.

.

.

.

.

.

John Zwak presented a paper on Using an Ice bath to approximate the Triple Point of Water (TPW)

.

.

.

.

John and Bill Bergquist also participated in the EXPO.  We had a little fun with the ICE theme..  It’s all about the ICE, ice bath, TPW, Minnesota ice fishing and the interesting combination of all three….

.

.

.

.

.

At Burns we believe in bring to your PRT and Temperature Calibration needs a practical and valuable perspective that will have a positive Impact on your Business….  If you missed us, send us a note at:  info@burnsengineering.com, comment on the BEblog, give us a call or stop by visit us in Minnesota.  Remember if you wait until January, that ice theme comes back in full force.

 See you next year at NCSLI 2009 in San Antonio.  Metrology’s Impact on Global Trade

Practical temperature measurement insights is Burns’ contribution to Metrology’s Impact on Global Trade…

Join us…

 Chuck

Along with our Spring loaded RTD’s, spring has definitely busted out and summer is in full swing.  The smell of fresh cut grass,  sun glasses, shade, all the wonders mother nature has to offer.  Sprinkle in a storm or 2 and some humidity and there’s no doubt summer in Minnesota has arived.

Back in the throws of spring, the Fun Committee at Burns thought we should bring a little GREEN inside.  So given a small cup, a handful of dirt and a pinch of seeds, a little contest began to see who could care for and grow the biggest plant……Needless to say the results are varied.……………….

The winner were crowned at our summer picnic today.  I’ll announce the winners next week….  May the greenest thumb win!

By the way, we are also breathing a little more life into our internal recycling program to promote awareness and better recycling throughout the organization.  More on that and other environmentally conscious efforts in a future post.………………………………………

What creative activities is your organization doing to serve Mother Earth?  Click the Comment button above and share…

Thanks

Chuck

The best things come in small packages.  I’ve heard that phrase many times.  Recently the engineering team at Burns has been working on a stealth project to evaluate material and process approaches for the purpose of; mini, tiny, micro and just little RTD’s.  We code named the project SLIM and gave it a mascot….

We discovered some interesting materials and process options, and broke a few assumptions and perceived constraints.  Then, in the design mode, applied these ideas and created a few new RTD’s for various applications throughout the BioPharma, Food & Beverage, PetroChem and Ethanol industries.  These little RTD’s play a role in Bearing temperature monitoring, product transit condition monitoring and various surface sensing and tight locations where addition temperature profile and awareness is important to the process.

The team had a blast think beyond the rules, historical approaches and known materials.  In true “achieve, change and improve” mode, we are doing it again.

What paradigms have you busted through recently?  Click the comment button and tell us a bit about your recent  A-ha’s.

Chuck�

The Burns team snapped a few photos at the FEW Expo…

What the talk is all about… 

Our friends from Yokogawa.

Some great guys at UNIVAR…….…..

Did you grab a bobber at the BURNS booth?

Proof that there is more to producing Ethanol than Ethanol..……………………………………………Food, Fuel, Feed.

Many of the organizations at the FEW event offered various perspectives regarding some of the controversy in the industry.

Fagen Inc. had this sign in their booth…

An interesting and informative Expo….

What were your observations or questions about Ethanol?  Click the comment button and share…

Chuck

Home from the FEW event?

Interested in what’s happening in the Ethanol Industry? 

Have a few thoughts about Ethanol and want to be in conversation? 

Here are three places to engage…

.

.

.

>  Burns BEblog…  we’ll stay connected from the temperature measurement perspective. Also check out the Ethanol page.

Sponsored by Ethanol Producer Magazine, Jessica Sobolik Managing Editor

.

.

>  The FEW Blog. 

>  Talking Stalk Blog, with Tom Bryan…

Stay in touch and share your experience and wisdom about the Ethanol Industry, critical temperature measurement and all the challenges we face in the world of energy consumption and sources…

Chuck

Ethanol and it’s expansive support industry at the FEW Event have rushed the gates at the Gaylord Opryland Resort and Convention Center.   They are talking everything from filter bag systems, mixers, bacteria issues, biodiesel, fermentation and thermal oxidizers….   The conversation even dipped into the area of CIP (Clean in Place), posing the question, “Should the Ethanol fermentation process move toward the sanitary guidelines similar to the food and beverage industry?”  This was driven by the co-product “Distillers Grain” entering into the food stream through the animal feed. 

The Expo opened Monday evening, breaking the ice with a Grand Opening and massive social in the expo arena.  The spirit in the room was an interesting mix of excitement, passion and commitment to all the good aspects and value of Ethanol as a clean and renewable fuel energy source.  That doesn’t mean that there aren’t questions and concerns about the interdependency with the other uses of corn, and the economic complexities as the ethanol industry grows….  It sounds like these folks are aware of all of this, and are committed to being good stewards of the resources they consume and at the same time looking for additional Sugar & starch sources to balance the demand for corn.  One alternate fermentation product being discussed is ALGAE!  Now that’s being creative!

More later from on the Fuel Ethanol Workshop & Expo and the passionate folks in attendance.

 What are your thoughts and concerns about Ethanol…  Click the comment button above and tell us your thoughts.

 Chuck�

Jim Burns has used a key phrase in nearly every communication to our various stakeholders.  That phrase is “Who we are and what we do…”  It seems to fit every aspect of the Burns vision, intention and values, guiding our interactions and purpose with all stakeholders: employees, suppliers, customers, contractors, representatives, distributors….It’s about being true to who Burns, as an organization, has been and is today!

It’s about being consistent and honest with what we do, what we are experts at, what our sweet spot is, and how we serve and resolve problems and challenges for our stakeholders.  (By the way, that’s the fun part!)

So, it seemed logical and effective to use the initials of Burns Engineering, “BE”, to build statements and phrases around describing who and how we will be for each other and for all the friends of Burns.  These phrases such as BE in conversation, BE temperature experts, BE creative, BE confident, BE relieved, effectively drive our thinking, behavior and intentions to support “Who we are and What we do…”  

Join us in the conversation through the BEblog or by registering on the Web Site to discover, design and create temperature products and systems to serve your success, and we promise to achieve, change and improve to continually serve you, and all Burns stakeholders. 

Thanks for joining Burns on this journey.

Chuck